SL185044-TB-BR-C3 INA

Alle Abmessungen

1. Innen (d) mm 220
2. Außen (D) mm 340
3. Breite (B) mm 160
4. Innen (d) Zoll 8.6614
5. Außen (D) Zoll 13.3858
6. Breite (B) Zoll 6.2992
7. Breite (b) mm 160

Suffixbeschreibungen

1. TB In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
2. BR Black Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing, Burnished Race
3. C3 Internal Clearance Larger Than Normal

Technische Daten

1. Verfügbarkeit 2 St.
2. Marke INA
3. Item number SL185044-TB-BR-C3 INA
4. Also known as 0581447730030
   
5. EAN 4054366765086
6. Category Zweireihig Zylinderrollenlager

Gewicht und Abmessungen

1. Gewicht (kg) 52.5

Produkteigenschaften

1. Bohrung C – Zylindrische Bohrung
2. Dichtung Keine Dichtung
3. Käfigtyp FC – Vollrollig, käfiglos
4. Externe Modifikation Keine Externe Modifikation
5. Interne Radialluft C3 Innenluft (größer als Cn)
6. Präzision BR - Black Finishing
7. Wärmestabilisierung Keine Wärmestabilisierung - Temperaturen bis 120°C

Angaben von Schaeffler (medias)

1. Grundstatische Tragzahl, radial (C 0r) 3650000
2. Begrenzungsdrehzahl (n G) 1140
3. Referenzdrehzahl (n ϑr) 630
4. ECLASS number 23-05-09-01
5. ECLASS2 number 23-05-09-01

Downloads und Links

1. Link to manufacturer Link to manufacturer