-
EUR
Account information
Configure your language -
EUR
| Temporarily sold out | |
| Worldwide shipping from the Netherlands | |
| 30 days return policy | |
| Track your order through Track & Trace |
Double-row self-aligning ball bearing without seal
| Stock |
|
| Brand | Ransome & Marles |
| Article number | NLJ1.1/8 Ransome & Marles |
| Inside diameter | 28,58mm |
| Outside diameter | 63,5mm |
| Width | 15,88mm |
The NLJ1.1/8 Ransome & Marles belongs to the group of double-row self-aligning deep-groove ball bearings. This bearing type without a seal is a double-row bearing. Both rows are housed in a spherical raceway in the outer ring. This construction allows the bearing to be self-aligning. This means that any misalignment of the shaft relative to the bearing housing does not adversely affect performance.
These features make the NLJ1.1/8 Ransome & Marles highly suitable for applications where substantial misalignment or shaft deflections may occur. Also, self-aligning bearings have the lowest friction of all rolling-element bearings. Even at higher speeds, there is only limited frictional heat. These bearings are capable of handling high radial loads. To a lesser extent, they can be axially loaded in both directions.
