SL185052-TB-BR-H123G-C3 INA

All dimensions

1. Inner (d) MM 260
2. Outer (D) MM 400
3. Width (B) MM 190
4. Inner (d) Inch 10.2362
5. Outer (D) Inch 15.748
6. Width (B) Inch 7.4803

Suffix description

1. TB In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
2. BR Black Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing, Burnished Race
3. H123G
4. C3 Internal Clearance Larger Than Normal

Technical details

1. Availability 0 pcs
2. Brand INA
3. Item number SL185052-TB-BR-H123G-C3 INA
4. Category Cylindrical Roller Bearing Double Row

Weight and Dimensions

1. Weight (kg) 85.5

Product Properties

1. Bore C - Cylindrical Bore
2. Seal No Seal
3. Cage Type FC - Full Complement, No Cage
4. External Modification No External Modification
5. Radial Internal Play C3 Internal Play (Higher than Cn)
6. Precision BR - Black Finishing
7. Heat Stabilization No Heat Stabilization - Temperatures up to 120 °C