LSL192330-TB-BR-C3 INA

Afmetingen

1. Binnenmaat (d) mm 150
2. Buitenmaat (D) mm 320
3. Breedte (B) mm 108
4. Binnenmaat (d) inch 5.9055
5. Buitenmaat (D) inch 12.5984
6. Breedte (B) inch 4.252

Suffix-omschrijving

1. TB In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
2. BR Black Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing, Burnished Race
3. C3 Internal Clearance Larger Than Normal

Technische specificaties

1. Beschikbaarheid 3 stuks
2. Merk INA
3. Item number LSL192330-TB-BR-C3 INA
4. Also known as 0535320900030
   LSL192330-A-C3
   LSL192330-B-C3
   LSL192330-TB-C3
   
5. EAN 4054363034581
6. Category Eenrijig cilinderrollager

Gewicht en afmetingen

1. Gewicht (kg) 40.7

Producteigenschappen

1. Boring C - cilindrische boring
2. Afdichting Geen afdichting
3. Type kooi S - stalen of standaard kooi
4. Externe aanpassing Geen Externe Aanpassing
5. Interne radiale speling C3 interne speling (hoger dan Cn)
6. Precisie BR - Black Finishing
7. Warmtestabilisatie Geen warmtestabilisatie - temperaturen tot 120 °C

Data van Schaeffler (medias)

1. ECLASS number 23-05-09-01
2. ECLASS2 number 23-05-09-01

Downloads en links

1. Link to manufacturer Link to manufacturer