SL192344-TB-BR INA

Afmetingen

1. Binnenmaat (d) mm 220
2. Buitenmaat (D) mm 460
3. Breedte (B) mm 145
4. Binnenmaat (d) inch 8.6614
5. Buitenmaat (D) inch 18.1102
6. Breedte (B) inch 5.7087
7. Breedte (b) mm 145

Suffix-omschrijving

1. TB In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
2. BR Black Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing, Burnished Race

Technische specificaties

1. Beschikbaarheid 1 stuk
2. Merk INA
3. Item number SL192344-TB-BR INA
4. Also known as 0547121490000
   
5. EAN 4054366744081
6. Category Eenrijig cilinderrollager

Gewicht en afmetingen

1. Gewicht (kg) 111.2

Producteigenschappen

1. Boring C - cilindrische boring
2. Afdichting Geen afdichting
3. Type kooi FC - volrollig, geen kooi
4. Externe aanpassing Geen Externe Aanpassing
5. Interne radiale speling Cn normale interne speling
6. Precisie BR - Black Finishing
7. Warmtestabilisatie Geen warmtestabilisatie - temperaturen tot 120 °C

Data van Schaeffler (medias)

1. Radial Static Load Rating C0r (N) 3450000
2. Radial Dynamic Load Rating Cr (N) 2650000
3. Basis statische radiale belasting (C 0r) "3450000.0000"
4. Grenstoerental (n G) 910
5. Referentiesnelheid (n ϑr) 520
6. ECLASS number 23-05-09-01
7. ECLASS2 number 23-05-09-01
8. Medias omschrijving Cylindrical roller bearing SL1923, full compl, roller set self-retaining, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type SL19

Downloads en links

1. Link to manufacturer Link to manufacturer